How to install CSF on cPanel server
What is CSF – Config Server Firewall is a stateful packet inspection firewall, login/intrusion detection and security application for Linux servers. What does that mean in English? Simple – it’s a program that can greatly improve your dedicated server or VPS’s security.
Login as the root user to SSH and run the following commands.
rm -fv csf.tgz
tar -xzf csf.tgz
If you would like to disable APF+BFD (which you will need to do if you have
them installed otherwise they will conflict horribly):
That’s it. You can then configure csf and lfd in WHM, or edit the files
directly in /etc/csf/*
Don’t forget to:
1. Configure the TCP_IN, TCP_OUT, UDP_IN and UDP_OUT options in the csf configuration to suite your server
2. Restart csf and lfd
3. Set TESTING to 0 once you’re happy with the firewall
csf is preconfigured to work on a cPanel server with all the standard cPanel
ports open. It also auto-configures your SSH port if it’s non-standard on
You should ensure that kernel logging daemon (klogd) is enabled. Typically, VPS servers have this disabled and you should check /etc/init.d/syslog and make sure that any klogd lines are not commented out. If you change the file,
remember to restart syslog.
Now go to vi /etc/csf/csf.conf
The firewall is STOPPED by default – it is not running. We need to configured it, and then take it out of Test Mode.
Click on Firewall Configuration
ETH_DEVICE =: Set this to eth+
TCP_IN/TCP_OUT/UDP_IN/UDP_OUT = : These are the ports you want to leave open for your server to operate. If you change the default SSH port make sure to add it here. Also add any other services you might have running such as Shoutcast or game servers. By default most of the ports used should already be configured.
MONOLITHIC_KERNEL = : 0 Only change this to 1 if your firewall will not start – otherwise leave it as it.
LF_DSHIELD = 0: Change this option to 86400. This is an automatic updated list of known attacking IPs. Enabling this will stop them from being able to connect to your server.
Spam Protection Alerts
If you want to add some spam protection, CSF can help. Look in the configuraiton for the following:
LF_SCRIPT_ALERT = 0 change this to 1. This will send an email alert to the system administrator when the limit configured below is reached within an hour.
LF_SCRIPT_LIMIT = 100 change this to 250. This will alert you when any scripts sends out 250 email messages in an hour.
Configuration Complete – Almost
Scroll down to the bottom and click on Change to save the settings. Then click Restart csf+lfd
You should see a big page of ACCEPT and near the bottom you should see:
csf: TESTING mode is enabled – don’t forget to disable it in the configuration
Starting lfd:[ OK ]
Click on Return
Now TEST all your services to make sure everything is working – SSH, FTP, http. After you do a few quick tests go back into the Firewall Configuration page.
TESTING = 1 change this to 0 and click Change at the bottom.
Then Restart csf+lfd(csf -r)